简体中文
EnglishHow to clean the dirty things in the semi-automatic washing machine？
Date:2023-04-07
1. How to clean the washing machine with bleach
After the washing machine has been used for a period of time, it may still look very clean on the outside, but the inside is already very dirty. At this time, it is very necessary to take the correct method to clean the inside. You can use the bleach cleaning method to flush the temporal part of the washing machine into half a bucket of water, and then pour in an appropriate amount of bleach. After stirring evenly, start the washing machine normally and let the washing machine spin. Although there is no laundry inside the washing machine, such an operation can allow the washing machine to clean itself and avoid dirt. After waiting for half an hour, the washing machine is basically cleaned. At this time, you only need to drain the dirty water inside the washing machine, and then add clean water to rinse and drain. This method is not only simple and convenient to operate, but also very effective.
2. How to clean the washing machine with a special cleaning agent
Cleaning the washing machine with detergent is a more scientific method than bleach. However, it should be noted that you should buy professional detergent, which will work better and be safer. At the same time, professional cleaning agents will cause much less damage to the washing machine when cleaning. When using a professional cleaning agent to clean the washing machine, it must be mixed with water before use. You can first find a large bucket, add water and cleaning agent to it, and then stir evenly. It is best to add an appropriate amount of descaling agent for mixing, then pour it into the In the washing machine, start the laundry mode of the washing machine, about 20 minutes, turn off the washing machine, drain the sewage, add clean water to rinse and then discharge.
3. How to clean the washing machine by soaking in hydrogen peroxide
When it comes to the hydrogen peroxide immersion method, everyone must think it is very complicated. In fact, the actual operation is relatively simple. Using this method, we can not only clean the stains on the inner wall of the washing machine, but also play a role in sterilization and disinfection. You can go to a nearby pharmacy to buy a bottle of hydrogen peroxide, then add an appropriate amount of water and detergent to the washing machine, then pour in an appropriate amount of hydrogen peroxide, start the washing machine, and let the washing machine run at full speed. It should be noted that after the washing machine is running, do not discharge the sewage immediately. It is recommended to soak for three hours and then discharge the sewage, which can play a very good role in sterilization and disinfection.
Pre：How does the frying air fryer？
Next：How to improve the cleaning effect of semi-automatic double-tub washing machine？
Next：How to improve the cleaning effect of semi-automatic double-tub washing machine？
.png.800.png?imageView2/2/format/jp2)
.png?imageView2/2/format/jp2)
.png?imageView2/2/format/jp2)
.png.800.png?imageView2/2/format/jp2)
